Home / News

Solar Street Light Installation Requirements For Controller Installation

Oct. 17, 2018

Solar Street Lamp rely on light energy as a source of solar street lights to achieve independent road lighting. Since solar street lamps use intelligent automatic lighting, in order to ensure the quality of road lighting, when installing solar street lamps, how should solar street lamp manufacturers configure controllers to achieve good road lighting?

In order to ensure the normal operation of the entire solar street lighting system, the controller should ensure that the battery components are not overcharged or voted and damaged under any conditions, and at the same time have control, control, voice control, temperature compensation and prevention. Ray, reverse polarity protection. In addition, the controller is responsible for monitoring the state of charge of the battery module, managing the charging process including opening and closing of the load, enabling the battery component to fully utilize the energy and prolong the service life. When configuring the controller, you can limit the charging voltage to prevent overcharging of the battery module, turn off the load to prevent discharge, and the controller can prevent the current from being too large. When the temperature is too high, the controller can automatically turn on/off the load or component. Overvoltage, the load can turn off the load.

Due to the non-contact control technology adopted by the controller, it has advanced control functions, and it is especially suitable for solar street lights and photovoltaic power generation control through automatic switching of loads, and has various protection functions. Therefore, when installing street lamps, Solar Powered Light Manufacturers only have reasonable configuration controllers to achieve good road lighting.

Solar Street Lamp